I am working on an IVR self service application for a client using the CISCO CVP 3.1 VXML Standalone Solution without a Call Manager. The client would like to trigger a dialing out the customer to notify him/her that their parking meter would be expired. The trigger of the application could be the CVP VXML server and when the call is connected, a record message is played and could be nice to link a VXML IVR application. Much appreciated if you can provide me with any suggestion or direction.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...