Re: CVP 7.0(2) not creating correct string to send to VXML Serve
I took advice you had posted on a previous topic and went through and set all the ECC variables to recommended lengths, added in one more ECC (user.microapp.play_data) and then rebooted the CVP PG. It's strange to think that I could play wav's from the media server, but not execute VXML if the ICM states were funky and the restart was actually what corrected it. So I'm leaning towards something I did with the ECC's although not exactly sure what part, but all is working now.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...