We have 4 CVP CALL/VXML server deployed (with ICM 7.2 in a H.323 model). We have A CVP OAMP server installed.
We are upgrading the CVP platform to CVP 8.0.
We upgraded the CVP OAMP successfully. Now we are trying to upgrade the CVP CALL/VXML servers one by one. We upgraded the first CALL/VXML server successfully. licence is uploaded too. But when acessing the statistics for the upgraded server from the OAMP console, we can see
Active H.323 Call Legs = 66 (a number which is modified all the time ) : that is normal.
Active VRU Call Legs=0 . this is not normal I think.
The other servers (not upgraded ones) present H.323 and VRU call legs different from 0.
Can you please advise what may be the issue of that upgraded server ?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...