We have CVP 4.02 standalone deployment. The application call flow is such, whenever a customer calls in, the ingress+vxml gateway sends a http request to the vxml server, we have a specified an element which captures the GUID & Call id and is used for the purpose of lookup & reporting.
The problem is at times, the GUID is being captured as all zeros, we are unable to find the root cause of the same.
If the problem had been with the element or the application, it would have been peristent across all the calls.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...