Defining the path of the prompts folder in the beginning of an IVR script
Is there a way to define the path of the prompts folder in the beginning of an IVR script? For example, instead of defining every prompt in the script as p[name of the directory\name of the prompt], I would like to set the path at the beginning of the script as ?set prompts = name of the directory?.
Re: Defining the path of the prompts folder in the beginning of
Interactive Voice Response (IVR) consists of simple voice prompting and digit collection to gather caller information for authenticating the user and identifying the destination. IVR applications can be assigned to specific ports or invoked based on DNIS. An IP PSTN gateway can have several different IVR applications to accommodate many different gateway services, and you can customize the IVR applications to present different interfaces to the different callers.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...