I have installed an IPCC 7.5 outbound dialer with CCM 7.0 and having an issue while making outbound calls, when i try to make outbound calls with in the LAN for testing it makes succesfull calls but when i dial to PSTN through Dialer the connects and gets drop suddenly. The debug voip dialperr inout command displays the call connected and gets drop from the called party after 2-3 seconds. At CTIOS outbound desktop client it displays the "The Call has failed because enoudh resources are not available.
The 30VIP phones you created in the Dialer (Dialer ports) are being used to place the call.
If you stop the Dialer, and run dialogictest.exe, and place the call, does it stay up OK? Although the commands between dialogictest and the 30VIP phones is Skinny, the outbound call is placed correctly. Now stop dialogictest and restart the Dialer (don't have these two running at the same time!)
If the call does stay up, the problem is occurring when the Dialer calls the customer, detects the answer, and then tries to transfer the other end of the call to the agent it has reserved with the Reservation Call. Is the agent phone configured correctly with Call Waiting on the CC line?
hi geoff, i stopped the dialer service and ran the command dialogictest.com but nothing happens a window came for a seconds and then went hide. My CTIOS lient was ready and got no call. Did i follow the right step
yeah sorry it was miswritten by me it is dialogictst.exe not .com. yes you are right first i did the same thing by double clicking but i read the guide and ran the command properly and now attach the is result. One more thing i noticed when ever i make outboun call and when the caller pick up the call the dialer keep me in Hold state and while tranefering to Talking state it gets drop.
please check the attache result file and guide me where i am wrong.
Thanks geoff for your help. The issue sorted out. every thing was configured fine excpt the IP phones i was using were also the part of Hunt group. i just remove the few IP Phones form the group and the outbound worked. But for one thing i am still confuse why outbound was working fine when i gave it internal network IP Phone extension as a customer number.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...