12-15-2011 11:06 AM - edited 03-14-2019 09:03 AM
my client plan to upgrade to UCCE 8.5 and to replace Cisco MCS Servers with virtual environment but with HP platform for all UCCE servers “ICM,CVP, CUIC 7 CUCM” does Cisco support virtualization with HP blade Server or only UCS servers if yes, its mean that TAC will be also support any issue related to UCCE.
Thanks in advance,
Saeed
Solved! Go to Solution.
12-15-2011 11:16 AM
You can run CUCM 8.5 as Virtual Machines on "spec hardware".
You can run PGs as Virtual Machines on "spec hardware", but that's the only component at this stage. If you wish to have router, logger, AW/HDS, CVP etc running on Virtual Machines, at the moment you must use UCS hardware. We look forward to the future when the other ICM/CVP components can run on VMs on "spec" hardware.
Regards,
Geoff
12-15-2011 11:16 AM
You can run CUCM 8.5 as Virtual Machines on "spec hardware".
You can run PGs as Virtual Machines on "spec hardware", but that's the only component at this stage. If you wish to have router, logger, AW/HDS, CVP etc running on Virtual Machines, at the moment you must use UCS hardware. We look forward to the future when the other ICM/CVP components can run on VMs on "spec" hardware.
Regards,
Geoff
12-16-2011 06:29 AM
Thanks Geoff for the reply.
can you provide with link which highlight the current support VM for UCCE.
Regards,
Saeed
12-17-2011 10:38 AM
Saeed,
about " can you provide with link which highlight the current support VM for UCCE. " not sure if I understood you right, but if you wanted to know which are all the UCCE components can be virtualized on VM, then please refer " Contact Center Applications " section of http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Supported_Applications
Pls remember to rate helpful posts.
GP
01-03-2012 07:18 AM
Docwiki shows that PGs are not supported on spec hardware. Is your source more recent?
01-04-2012 12:10 AM
Yes, that's the updated DocWiki from Cisco.
GP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide