Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Does UCCE 8.5 support VM with HP platform "Blade"

my client plan to upgrade to UCCE 8.5 and to replace Cisco MCS Servers with virtual environment but with HP platform for all UCCE servers “ICM,CVP, CUIC 7 CUCM” does Cisco support virtualization with HP blade Server or only UCS servers if yes, its mean that TAC will be also support any issue related to UCCE.

Thanks in advance,

Saeed

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Does UCCE 8.5 support VM with HP platform "Blade"

You can run CUCM 8.5 as Virtual Machines on "spec hardware".

You can run PGs as Virtual Machines on "spec hardware", but that's the only component at this stage. If you wish to have router, logger, AW/HDS, CVP etc running on Virtual Machines, at the moment you must use UCS hardware. We look forward to the future when the other ICM/CVP components can run on VMs on "spec" hardware.

Regards,

Geoff

5 REPLIES
Green

Does UCCE 8.5 support VM with HP platform "Blade"

You can run CUCM 8.5 as Virtual Machines on "spec hardware".

You can run PGs as Virtual Machines on "spec hardware", but that's the only component at this stage. If you wish to have router, logger, AW/HDS, CVP etc running on Virtual Machines, at the moment you must use UCS hardware. We look forward to the future when the other ICM/CVP components can run on VMs on "spec" hardware.

Regards,

Geoff

New Member

Does UCCE 8.5 support VM with HP platform "Blade"

Thanks Geoff for the reply.

can you provide with link which highlight the current support VM for UCCE.

Regards,

Saeed

Cisco Employee

Re: Does UCCE 8.5 support VM with HP platform "Blade"

Saeed,

about " can you provide with link which highlight the current support VM for UCCE. " not sure if I understood you right, but if you wanted to know which are all the UCCE components can be virtualized on VM, then please refer " Contact Center Applications " section of http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Supported_Applications

Pls remember to rate helpful posts.


GP

Bronze

Does UCCE 8.5 support VM with HP platform "Blade"

Docwiki shows that PGs are not supported on spec hardware.  Is your source more recent?

Cisco Employee

Does UCCE 8.5 support VM with HP platform "Blade"

Yes, that's the updated DocWiki from Cisco.


GP.

751
Views
0
Helpful
5
Replies