cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
855
Views
0
Helpful
1
Replies

extension mobility in UCCE CAD

fzhang
Level 1
Level 1

Hello, I know that CTIOS in UCCE doesn't support extension mobility but I'm wondering if by any chance CAD in UCCE will support phone extension mobility?

Thanks.

1 Reply 1

anchoudh
Level 9
Level 9

Hi,

Please refer the UCCX 8.5 SRND page 166,

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise8_5_1/design/guide/uccesrnd85.pdf

Agent Mobility:

Within the Unified CCE deployment, the agent desktop application is not statically associated with any specific agent or IP phone extension. Agents and phone extensions (device targets) are configured within the Unified CCE configuration and associated with a specific Unified CM cluster.

When logging in from an agent desktop application, the agent is presented with a dialog box that prompts for agent ID or login name, password, and the phone extension to be used for that session. At that time the agent ID, phone extension, and agent desktop IP address are dynamically associated. The association is released when the agent logs out.

This mechanism enables an agent to work (or hot-desk) at any workstation. It also enables agents to take their laptops to any Cisco Unified IP Phone and log in from that device (assuming the phone has been configured in Unified CCE and in Unified CM to be used in the Unified CCE deployment). Agents can also log in to other phones using the Cisco Extension Mobility feature. For more information about Extension Mobility, see the Extension Mobility section of the Cisco Unified Communications Manager Features and Services Guide.

Hope it helps.

Anand

Please rate helpful posts..

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: