You can use any hardware platform you like (from any vendor) as long as it supports the specifications required for the VM and the OVA template.
You can only use servers from 3 vendors - Cisco UCS, HP and IBM. You can only use servers with Intel processors from the specified set listed.
At the moment, you cannot use servers with the new Xeon E5-2600 family (Sandy Bridge) - and that is what IBM are using in their new System x3500 M4 and the System x3650 M4, and what HP are using in the DL380 Gen 8 servers.
I don't know about IBM, but the Gen 8 HP servers are on the VMware list for 4.1 ESXi.
Cisco needs to complete their evaluations and get the E5-2600 family (those over some specified speed) on the list because customers will be wanting to use them for UC. Hope this doesn't take too long.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...