Need some help with setting up a Holiday Script.I have questions like how to create the XML file and where to place it.Hope this make sense. Some step by step instructions would be GREAT.Thanks for all the help
Hi, I'm lost on this. Basically, I have a main script that calls the holiday script as a subflow. Both pass the validity test but, when doing a debug on the main script it fails when getting to the run subflow step with an error indicating that it can't find the dates.xml file referenced in the subflow. Now the holiday script was written originally for 3.X and I'm using 5.0(2) so not sure if that's a problem. The notes on the subscript indicates that the dates.xml file needs to go into the wfavvid directory. I have this there but I guess I need to use the document management in IPCCX to load the dates.xml file into the repositry? Question - is this right and if I do have to upload the document, which folder will I use - default,en or en_gb and what variable in the holiday script do I need to modify - if i have to to make it look at a different directory.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...