Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

High Traffic on IP Phones

Hi Nettech

I have a problem where the message "High Traffic Call Try Your Again Later" is being displayed on the IP Phones, whenever this happens there is a delay in dialling a number or selecting a line to dial you get a 10 - 15 secs. delay. I crave your help in this matter.

Mesdean

8 REPLIES
Silver

Re: High Traffic on IP Phones

Whenever the CallManager service parameter LowPriorityQueueThrottlingFlag = TRUE and the LP queue is over the limit specified by the CallManager Service Parameter LowPriorityQueueThrottlingMaxCount, then the message 'High Traffic Try Again Later' will be displayed on the LCD of any IP phone registered to this server attempting to go offhook and make a new call.

When you begin seeing "High Traffic, Try again later" on the phones, then note the time and take a look at the SDL\CCM traces during that time. Look for the LP queue getting backed up. By default, this message will be displayed on the phone if the LP queue gets deeper than 20 signals

New Member

Re: High Traffic on IP Phones

Has anyone seen this message on version 4.x? The LowPriorityQueueThrottlingFlag doesn't appear under the CallManager Service Parameter in this version but we're seeing the above message along with no dial tone.

New Member

Re: High Traffic on IP Phones

Has anybody seen this message in CUCM 6.1

Again, the LowPriorityQueueThrottlingFlag doesn't appear under the CallManager Service Parameter in this version but we're seeing the above message along with no dial tone.

New Member

Re: High Traffic on IP Phones

I have a customer running 6.0 and they see this message 4-5 times a day, never saw it before on 4.1.......is it still an issue in your environment?

I am about to log a tac case.

cheers

andy

New Member

Re: High Traffic on IP Phones

The site hasn't gone live yet but yes I believe its still happening.

Let us know how you get on with the TAC and your case number so I can reference when I get around to logging a call.

New Member

Re: High Traffic on IP Phones

Been running CCM 6.0 and 3 days ago we upgraded to CCM 6.1 and yesterday for the first time one user reported seeing the "High Traffic..." message on their phone.

Anyone know the outcome of this?

Bronze

Re: High Traffic on IP Phones

Was this ever resolved? im having the same issue on a CUCM 7.X implementation. appreciate some insight into the issue and what was done to resolve.

thanks in advance

New Member

High Traffic on IP Phones

Ive got it on an 8.5 cluster.  Anyone find the service parameter?

2191
Views
0
Helpful
8
Replies