Re: How to manually remove a sever from a cluster (IPCC Express)
If you are installing SQL 2000 in a high-availability cluster, either co-resident with CRS, or on expansion servers, you must complete server setup on the first server which has SQL 2000 installed, and activate the Datastore components before even installing the second server with SQL 2000. If you do not follow this procedure, you will encounter a problem with the SQL Utility program running repeatedly. If this happens, you will need to select "Remove Server" from Appadmin Control Center to
remove the second database server from the cluster, complete the SQL Utility run on the primary database server, and then run the CRS installer on the second database server to add back that node to the cluster, and run server setup on the second database server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...