There is a DDTS in this area - CSCdy66959 - Calls dequeued from CSQ do not get tracked properly. The same will be fixed in 4.0
The following is from the DDTS Release-notes
Historical Reporting shows a call as abandoned when it is redirected after being dequeued from a CSQ.
This happens even when there is a Set Contact Info step that marks the contact as handled in the successful branch of the Redirect step.
Refer to the Real Time Reporting Stats which will correctly reflect the contacts as Dequeued
My question is thus:
Using the "CSQ IP ICD Stats" report, I see the calls as "Dequeued", however using the "Overall IP ICD Stats", they show up as abandoned. In both instances, I am using Real Time Reporting and not Historical. So (and here is the question) is that part of the same bug?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...