ICM 8 WebView Reporting on 15 minute interval data
We’ve recently upgraded ICM to version 8.0.2. We enabled the option to set the reporting interval to 15 minutes in ICM.
This has meant that all existing 30 minute WebView Reports now do not contain data.
We understand that "out of the box" standard WebView does not support 15 minute interval data
We've undertaken some work to look at developing custom webview reports to report on the 15 minute data. This involves modifying the existing Half_hour Views (For Call Type, Skill Group, agent, etc) to read records with a Reporting_Interval field set to 15 rather than the standard 30. We then are looking to modify all templates to read from this new 15 minute view.
Does anyone have a view as to any problems we may encounter with this approach? Or has anyone seen this approach taken at any ICM 8 sites successfully/unsuccessfully?
"Some, but not all, Half_Hour tables now have an equivalent Interval table. The Half_Hour tables still appear in the database, but are no longer populated. For Unified IC only (and not for WebView) the equivalent Interval tables are populated by either half-hour or fifteen-minute data, based on configuration. WebView uses “half-hour views” to pull 30-minute data from the Interval tables"
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...