If you are trying to setup ICM on a single machine (which is known as a 'sprawler'), then you would still need to configure other servers (PGs and Roggers) on same machine. The error message you are getting is probably due to the PGs and Roggers not installed.
The real-time feed is a connection from the AW process(es) - the Distributor in the ICM Services window - to the Router. In order to establish the real-time feed you must start the Logger, Router and Distributor. It is not necessary to have any PGs running.
(PS. Why are you playing with ICM 5.0? ICM is currently at 7.0, and things are pretty different with 7.0 - W2K3, Active Directory integration etc. - and you would be wise to start there, unless you have a specific customer whose deployment you are replicating.)
If you want the whole Sprawler to come up you'll need to install a PG instance otherwise the system will bounce. But your general issue is usaally the Realtime feed hasn't been established. Remember you need the RTR, Logger, AW and a PG to bring the whole sprawler up.
If you need additional help you may want to reach out to Dimension Data in the US. Pete Hudson, Athan Poulas, Codey Mortsen are all experts in this area within DI data.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...