one our customer has ip ivr 4.0(4)_Build140 and has problem with busy branch of Call Consult Transfer.
The problem is that when Call Consult Transfer is reached in a script and the DN is busy (that the call should be transferred), script doesn't execute busy branch. Script jumps on some other part of script (that has no connection with this part).
We found this problem with few DNs that has Busy trigger set to one. Busy trigger was changed to 2 for those numbers, but now when that DN already has 2 active calls and call from IVR is the 3rd one, the same thing happens - it jumps on other part of script, not executing busy branch. For other scenarios (Timeout, Invalid and Unsuccessful) everything works fine.
Did anyone have the same problem? or do you have any idea what could be the problem? how can it be solved?
I suspect that is some kind of bug, but I didn't find anything with Software Bug Toolkit.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...