Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPCC 7.1.5.0 CAD Licenses

Can someone explain how to install more licenses for CAD? We are intermittently running out and are in the process of purchasing more. Or should this be something TAC should do?

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: IPCC 7.1.5.0 CAD Licenses

Run the LicenceManager, hit the web site, enter the customer ID, and the two "Request #"s that are showng on the LicenceManager, and the number of licences you need. Hit the button.

When it returns with the 4 numbers, use copy and paste to copy the 4 numbers into LM.

Regards,

Geoff

5 REPLIES

Re: IPCC 7.1.5.0 CAD Licenses

Look at the installation guide, the process is pretty straight forward. You do the same process as the initial license installation.

david

Green

Re: IPCC 7.1.5.0 CAD Licenses

Not quite the same.

You need to have the customer ID number that was generated when you first went to the Spanlink licence site and requested your first licenses.

It's not specified in the document, but when you did that (you would have set the customer number to zero) and it returns with the 4 keys based on the computer ID, which you copy into LicenseManager.exe, you should have set the customer ID to the number returned.

It's not necessary, but if you did, now when you run LicenseManager.exe you will see the number.

Anyway, assuming you copied this down, go back to the licencing web site and, after logging in, enter the customer numer. The details will be retrieved, and you can request more licences up to what you have paid for.

Regards,

Geoff

New Member

Re: IPCC 7.1.5.0 CAD Licenses

So after I get the needed keys I just run LicenseManager and put this information in?

Green

Re: IPCC 7.1.5.0 CAD Licenses

Run the LicenceManager, hit the web site, enter the customer ID, and the two "Request #"s that are showng on the LicenceManager, and the number of licences you need. Hit the button.

When it returns with the 4 numbers, use copy and paste to copy the 4 numbers into LM.

Regards,

Geoff

New Member

Re: IPCC 7.1.5.0 CAD Licenses

Sounds like a plan

Thanks Geoff

210
Views
0
Helpful
5
Replies