Looks both controlled by the IPCC IVR license and the question is how leverage between two. I understand both are assigned to application but why they can assign different number. what's best practice or estimation methodology? For example, same number as best practice or number of percentage to media group versus cti group.
Cisco Media Group can includes all the ports that you have licensed in your IVR. You can have several Media Groups depends on the functionality that you would like to associated to those ports: a media group ports for ports, for example, with TTS support, another one with ASR support, and so on.
You could use CTI Port Groups to associate a number of ports to differente applications: for example, one CTI Port Group for queue applications, another one for self-service application 1, and so on.
There could be other methodologies to implement this groups.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...