Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPCC Express- Changing IP address of CallManager

Hi,

writing to inquire if anyone has had to change the IP address of the Call Manager with a IPCC Express 4.x server on the network? I have a customer who wants to move thier CallManager (UCM 6.1) but I am not 100 percent sure on the impact on the IPCC Express Box.

To be more clear my question is what are the area of IPCC Express that I need to change i.e. registry settings etc.

Thanks all

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: IPCC Express- Changing IP address of CallManager

Hi,

there is a number of steps you need to perform BEFORE actually changing the IP address of the CallManager server within the IPCCX configuration.

There is a tool called CRS Serviceability Utility, you can find it in the Start menu on the IPCCX server.

Make sure you plan a maintenance window because this operation needs a CRS node restart.

Take a look at two panels, Cisco CallManager IP address and the CiscoCallManager LDAP configuration (if you use the default LDAP server, "DC Directory").

Take a look at the attached screenshot.

G.

5 REPLIES

Re: IPCC Express- Changing IP address of CallManager

Hi Zamora

So my understanding is that your custoer is thniking of upgrading their Call Manager to version 6.1

If this is the case then you will be forced to perform a upgrade of your IPCC box.


As per the matrix:

End of Sales IPCC Product

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crsmatrxeol.pdf

Version 4.x of IPCC Express is no compatiable with version 6.1 of CUCM.

For compatiable version please refer too:

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf

Now the path would be to first make sure your IPCC Express is version 4.0(5)  and then run the Data Migration Tool.

Once the data file has been created, restore the information back onto a version 7.x IPCC.

Please note that you may need hardware for IPCC 7.x but refer to the guide on what you require.

New Member

Re: IPCC Express- Changing IP address of CallManager

Sorry Hoai I wasn't clear. The customer is already at UCM 6.1. They are wanting to change the IP address of the Call Manager. The IPCC express IP address will not change however that stays the same.

So to review

Change UCM (Call Manager) IP address - No subscribers since it's Business Edition

Leave IPCC Express IP address the same

Re: IPCC Express- Changing IP address of CallManager

Hi,

there is a number of steps you need to perform BEFORE actually changing the IP address of the CallManager server within the IPCCX configuration.

There is a tool called CRS Serviceability Utility, you can find it in the Start menu on the IPCCX server.

Make sure you plan a maintenance window because this operation needs a CRS node restart.

Take a look at two panels, Cisco CallManager IP address and the CiscoCallManager LDAP configuration (if you use the default LDAP server, "DC Directory").

Take a look at the attached screenshot.

G.

New Member

Re: IPCC Express- Changing IP address of CallManager

Thank you very much Netbakter...I appreciate the response

New Member

Re: IPCC Express- Changing IP address of CallManager

this process should be done before changing IP address, or can i do it after ?

1695
Views
0
Helpful
5
Replies