I am making a script for the users so that after a prompt they can enter 4 digit code based on which calls can be forwaded to different Queues.
Any idea how :) how i can do this. I have all queues defind and working fine thing i am not clear is how to ask user to enter code and then what to do with that code for call forwading in different queue.
I will assume that you have IPCC Express. Use the "Get Digits string" step and play a defined prompt using the step, at the same time collect 4 digits with it and store the result in a variable (filter tab). Then depending on how many options you want to allow (queues) you can either have multiple IF statemets to check for the value of the variable or you can use the SWITCH step.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...