I'm currently runnin IPCCX 4.0 Enhanced and i'm trying to write a script that write the information to the customVarlableX on the db_cra database to generate a custom variable report by using the Historical Reports client, i've tryied by using the Set Session info step and the Set Enterprise call info but without results.
If you have an answer for this issue please let me know.
I ran into this same issue. The problem is that the documentation is incorrect. In order to set the values into the customVariable fields in the database, you use the SET ENTERPRISE INFO function. On the general tab, you will see 12 fields that can be populated. PeripheralVariable1 maps to CustomVariable1 in the database and so on. I faced this same issue today, and found this solution with some help. I have tested it and it works.
The set session info method specified in the documentation does NOT work. Don't waste your time banging your head against the wall trying to get it forced. TAC agreed with me on this today and has opened an internal case to get all their docs that reference this fixed.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...