IPCCX 4.0: Fetching a document from the Repository
What is the correct way to fetch a document from the repository (e.g. an XML file)? Before IPCCX 4.0, files were stored locally and a Create File Document step was used to get the file from the disk.
However, with the use of the repository in IPCCX 4.0 HA environments, files should be placed in the repository, rather than on a path on a specific server. The only way I've found of fetching the document is to use the DOC[..] method, although the document language cannot be specified; is the default language (as configured under the System Parameters, used to determine which document to fetch?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...