Actually all the keys are located in a directory on the Linux paired versions. If you search for the same key on the hard drive, you should find it (can't remember the directory since I'm not in my office) but you can re-name that same key. (add .old as extension for example)
The IPCC should re-create the key properly after that lock is no longer there.
Let me know how that turns out for you and I can find specifics if necessary.
Thanks for the response, yes if you could supply the specifics that would be excellent, I don't proclaim to be a Linux expert or even close to one so all information you could provide would be greatly accepted. I do have guys in the office who are more at home with it so a combination of the two should get us back on track with this customer.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...