Can any one direct me if there is a CD Media to do upgrade from IPIVR 3.1.3 to IPIVR 4.0.4 directly? I looked in the documents and did not find, I found about hardware and software compatibility but did not find about the upgrade possibilities.
FYI there are a lot of issues with upgrades from 3x to 4.0.4. I would highly recommend going to 4.0.5 as the upgrade process was reworked in this version to deal with these issues. If you must go to 4.0.4, I would recommend rebuilding the OS from scratch after the uninstall step of the upgrade is complete, then performing a restore with the backed up data (this is how the upgrade is handled in 4.0.5, see the 4.0.5 install doc for details).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...