I have a problem with auto attendant script. I have a customer who has a greeting saying Welcome to XXXX company.Please enter the desire extension at any time. or else please wait for the operator. Now they want to add an option for the user to press 1 so that the call wil be transfereed to techincal supportteam. The flow wil be like this. WElcome to XXXX company. Please enter the desire extension at any time.For techincal relted queries please press 1 or else please wait for operator. So if the user press 1 the call will go to tehnical department.
The problem is in the script once the call lands in we have configured in such a way that the system will accept the 4 digit extension and if the user dont press the 4 digit extension it will go to operator. Now if i add the option of 1 in that system is waiting for another 4 digits then it is timing out and going to operator. Is there any way to accomplish the above task. I am adding the script for your reference.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...