We have noticed that something changed between ICM 7.5 and 8.5 and/or CVP 7.0 and 8.5. We have one or two situations where a call comes into the CVP Ingress Gateway, does the normal CUSP>CVP stuff, kicks off an ICM script and ICM immediately responds with a Label that evokes a DTMF *8 for Take-Back And Transfer. In ICM 7.5/CVP 7.0, this worked fine even without setting any VXML parameters or extending the RTP from the Ingress GW to the VXML GW. Ever since we migrated to ICM 8.5/CVP 8.5 and new IOS on the Ingress (15.0(1)M7) and VXML GWs (15.1(3)T1), the only way we can make the TBAT work is by playing a silence.wav file via a simple VXML app. It seems like the new versions moved the code needed for DTMF from the Ingress GW to the VXML GW, or something. I’ve tried searching Cisco.com for this issue but haven’t found anything yet.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...