11-25-2013 05:54 PM - edited 03-14-2019 12:47 PM
Hi
Someone knows, How to configure into the script ICM a node to dial a number or extension?
In theory with a label node, but how to make the configuration
Thanks
Solved! Go to Solution.
11-26-2013 11:28 AM
in the icm script, use the "label" node.. set it to dynamic and write the extension/phone number between ""
the call will then be sent back to cvp and you can forward it to cucm/gw
Sent from Cisco Technical Support Android App
11-26-2013 01:21 AM
Hi,
using the ICM Config Manager. Tools > List Tools > Label List.
You might want to configure a label for each peripheral aka routing client (you most likely have one AG/CUCM and a pair of VRU peripherals). Label = phone number. Label type = normal. Don't toch the rest of the form.
In your script, use the Label node, and add a label for each peripheral (this ensures that wherever the call is, it will get the label).
G.
11-26-2013 11:28 AM
in the icm script, use the "label" node.. set it to dynamic and write the extension/phone number between ""
the call will then be sent back to cvp and you can forward it to cucm/gw
Sent from Cisco Technical Support Android App
11-26-2013 04:56 PM
Excellent it worked !!!
Thank you very much to both
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: