Hello. Looking for CCX scripts that involve placing an automatic call back. Without having the agent dial the digits. Sceanrio is : 1. Caller selects callback option, 2. Get call back number digits and confirm, 3. Queue the phanton call so that the caller does not lose its relative position, 4. When the phantom call is at top of queue, dial the number and route the call to next available agent.
I am wondering if it is possible to do this as well.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...