Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MGCP and H323 with CVP

I've a customer that wants to continue using MGCP for IPT and dedicating H323 Gateways for CVP.

They have a large amount of MGCP gateways and from a support perspective they want to continue using these.

1. If the IP Phone accepts an incoming call from the MGCP Gateway, should they be able to transfer to the IVR number internally by transferring the call to a route pattern pointing to the H323 gateway?

2. If 1. can work, they want a small number of calls to run via the MGCP gateways that are bound for CVP, with a route pattern pointing to H323. Is this possible?

New Member

Re: MGCP and H323 with CVP

An E1 or T1 needs to be dedicated to H.323 or MGCP. For example MGCP will use on the controller

pri-group timeslots 1-24 service mgcp

A H.323 will use

pri-group timeslots 1-24

If you have more than one T1 or E1 then you could do what you want.