MGCP and H323 with CVP

[micandre]

I've a customer that wants to continue using MGCP for IPT and dedicating H323 Gateways for CVP.

They have a large amount of MGCP gateways and from a support perspective they want to continue using these.

1. If the IP Phone accepts an incoming call from the MGCP Gateway, should they be able to transfer to the IVR number internally by transferring the call to a route pattern pointing to the H323 gateway?

2. If 1. can work, they want a small number of calls to run via the MGCP gateways that are bound for CVP, with a route pattern pointing to H323. Is this possible?

[michael_oldham]

An E1 or T1 needs to be dedicated to H.323 or MGCP. For example MGCP will use on the controller

pri-group timeslots 1-24 service mgcp

A H.323 will use

pri-group timeslots 1-24

If you have more than one T1 or E1 then you could do what you want.

Michael