Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Monitoring - Recording (IPCC 4.0(3))

Hello,

I need to allow supervisors make recording and monitoring.

I activated the monitoring and recording component on the CRS server. I don't use IPPA, I use CAD with IP Phones or IP Communicator.

Do I have to configure SPAN port on the switch? Are there other things that I must check?

Thanks.

10 REPLIES
Blue

Re: Monitoring - Recording (IPCC 4.0(3))

need to install the monitoring capabilites on the agents desktop, CAD.

during CAD install, this is an option that can be chosen. (there are compatibility problems with intelPRO nics and we've had to change to broadcom on the agent PCs)

New Member

Re: Monitoring - Recording (IPCC 4.0(3))

Great. Is there any restriction concerning the IP Phones Models?

I have 7905, 7912 IP Phones.

Does Monitoring and Recording work when connecting the agents desktop through these IP Phones or should I configure SPAN port?

Blue

Re: Monitoring - Recording (IPCC 4.0(3))

no restrictions that i know of.

any agent CAD that has silent monitoring installed should work.

New Member

Re: Monitoring - Recording (IPCC 4.0(3))

Do 7905 and 7912 have two ethernet ports? for desktop monitoring, the agent PC must be dainsy-chained from IP phone, so agent desktop is capable to capture voice, and send to supervisor, no SPAN is required.

Wei

Hall of Fame Super Silver

Re: Monitoring - Recording (IPCC 4.0(3))

7905 does not, 7912 does.

Chris

New Member

Re: Monitoring - Recording (IPCC 4.0(3))

Hi,

If you say about Silent Monitoring (SM), then you will be have problem with the model 7905 IP Phone, because its have only one telephone line, model 7912 is a single-one line telephone too, but it have 2 port for catalyst, what is basic condition for SM.

But I find this doc, where say, that 7912 dont support SM "7910 and 7912 IP phones do not support the Desktop Silent Monitor feature. The 7910+SW phone does support this feature.".

Regards

Armen

New Member

Re: Monitoring - Recording (IPCC 4.0(3))

That is right because 7912 and 7905 are with only one ethernet port, while 7910+SW with 2. In this situation, SPAN port/vlan is the only option, and this requires VoIP monitor server to be placed locally to the phones.

Wei

Hall of Fame Super Silver

Re: Monitoring - Recording (IPCC 4.0(3))

Actually 7912 does have an ethernet port to daisy chain the PC.

http://www.cisco.com/en/US/products/ps6509/prod_configuration_guide09186a00805f1668.html#wp1793488

Chris

New Member

Re: Monitoring - Recording (IPCC 4.0(3))

I don't see any option for this wehn installing the ACD. Am i missing it somewhere? I only have the one box to check "ACD Agent".

New Member

Re: Monitoring - Recording (IPCC 4.0(3))

Hi,

I think that this doc will be help you.

Regards

Armen

310
Views
0
Helpful
10
Replies
CreatePlease login to create content