Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Outbound Campaign Delay- hearing Silence and Music

IPCC Ent 6X with IPIVR 4X. Got an outbound campaign setup to dial out and play canned messages and seems to be working. The only issue I cant figure out is that when the call connects, there is a long silence and short music before the script plays in IPIVR. Is there a delay timer that can be tweaked to eliminate this?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Outbound Campaign Delay- hearing Silence and Music

The music is likely coming from the hold audio source on the Dialer ports. In Call Mangager, set the hold audio source for the dialer ports to silence.

For slow transfer times this document may be helpful: http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_tech_note09186a00805b6e23.shtml

Often long transfer times are related to answering machine detection. You can look up recommended answering machine detection settings in the latest outbound user guides.

1 REPLY

Re: Outbound Campaign Delay- hearing Silence and Music

The music is likely coming from the hold audio source on the Dialer ports. In Call Mangager, set the hold audio source for the dialer ports to silence.

For slow transfer times this document may be helpful: http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_tech_note09186a00805b6e23.shtml

Often long transfer times are related to answering machine detection. You can look up recommended answering machine detection settings in the latest outbound user guides.

144
Views
0
Helpful
1
Replies
CreatePlease to create content