We use persistent variables to control opening hours and such at a customer site with IPCC Enterprise 6. The user and persistent variables and their values are written to the hds tables t_User_Variable and t_Persistent_Variable (after changing the Persistent registry key value for the logger). This way we can access them from applications displaying different queue information. However, we have not found this to be true in IPCC 7.0. We simply cannot get the system to write the variable values to the t_Persistent_Variable table in any database. This is critical as we are to upgrade a customer site from IPCC 6 to 7. Anyone had any experiences with this that might help me out?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...