Re: PIM not able to register with MDS - " Client is already regi
That's right for production systems. But you can install more PG Services in a machine for demo or lab enviroments.
You have to change the MDS ports in the registry for the PG. When you install the two PGs you will have got, for example, in the first one 'MDSPort'=42000 and 'StateXferPort'=42001. The second one will have got, for example, in the first one 'MDSPort'=43000 and 'StateXferPort'=43001.
When you install the third PG, those two ports will be the same as in PG1 or PG2. If you change those ports to, for example, 'MDSPort'=44000 and 'StateXferPort'=44001, you will have three PGs in the same hardware. But every time that you run the setup for the third, fourth, and so on, PGs you will have to edit those ports and change them.
But this is not for production systems, It is only labs or testing systems.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...