Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

playing multiple prompts in the resource select step

                  I have Express enhanced 7.2 UCCX   

I have my promtps carved into 1 minute lengthes so i can do different things based on the time in queue. what I would like to do is under the resource select step I play the prompt then check status of the queue and play a postion prompt. After it does that I would like it to play a different propmt before it checks the next time. So the ideal would be is to have 3 different prompts and rotate them in while in queue.

Does that make sense? I cannot see how to do this easily. I cannot find a pallet that does so far.

Thank you!

3 REPLIES

Re: playing multiple prompts in the resource select step

Off the top of my head I would do this:

Pseudo Code

...

Label Queue Loop

PIQ = Get Reporting Stats (Position in Queue)

Play Prompt (--Triggering Contact--, you_are_the + #[PIQ] + caller_in_queue)

switch (++loop_counter)

     case 1:

          set current_prompt = P[short_wait.wav]

     case 2:

          set current_prompt = P[moderate_wait.wav]

     case 3:

          set loop_counter = 0

          set current_prompt = P[infinite_wait.wav]

Play Prompt (--Triggering Contact--, current_prompt)

Goto Queue Loop

Does that make sense?

The only part I could think that would hang you up is the "++loop_counter"

It basically takes the integer loop_counter and increments it by one, before evaluating it for which case is the current one.

E.g., If you start with loop_counter = 0, then "++loop_counter" will bring it up to 1, and then case 1 will match.  The next time through it will bring it up to 2, and match case 2.  And when it goes to 3, and matches case 3, it resets to 0 again.

Hope that helps.  Happy rotating!

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.
New Member

playing multiple prompts in the resource select step

Hi Anthony,

not sure if you will be interested in my query but you have helped me before and i am grateful. It would be really nice if you can have a look in below script and tell me how to integrate multiple prompts during agent selection process.

thats the part of teh script we have in our system. the issue is the prompt keep playing if an agent is in ready mode but not answering their phone. it never gets to the Queue step. it goes to teh queue step only if no agents are in ready mode. my question is if there's a way to play multiple prompts within select resorce step if agents are not answering and their state is ready. any help would be greatly appriciated.

Regards

Mohammad Chowdhury

playing multiple prompts in the resource select step

Sorry for the late reply.

You will not be able to play a message when an Agent does not answer, as long as there are still other Agents in the Ready state.

Here's a post that further explains this limitation:  https://supportforums.cisco.com/message/3665460

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.
555
Views
0
Helpful
3
Replies
CreatePlease to create content