Thanks for the reply. These loggers are separated by a WAN connection that went down simultaneosly fro both public and private networks. Initially I tried sincronising the loggers using ICMDBA but for some reason with no success so I hado to copy the LoggerA database and restore on the LoggerB side. What was causing the problem with the purge is that the stored procedure in SQL was pointing to LoggerA registry setting. Modifying it to LoggerB solved the problem. Curiously only some of the tables were not being purged while others were.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...