I have set up QM 2.6.2 as per the manual and configured SPAN in the intention to use server-based recording. Checked SPAN, works fine, i am receiving UDP if there is acive voice convesation on the phone.
SPAN is connected to the second port of the QM machine.
I configured VOIP devices in the QM Admin application to include the phones that i need to record.
Still the recording folder is empty.
Do I have to enable/configure anything else in order to get it up and running.
I could not find any way to tell the QM machine which one of the NIC cards to use for SPAN and which one - for normal server access. Could it be the problem?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...