We are into implementation phase of IPCCX 4.0.4, where we have to create IVR call flow for HelpDesk.
We are facing difficuities in terms of creating on script. Hope some one can help us, i am writing th description of what we needs to do as per customer requirement.
- We have to create outage script for the call center where CallCnter MAnager will call and record the disaster/emergency/funtions not working messages. Customer wants both th prerecorded options to be there and recording on Fly will also What they are looking for.
For Eg: I dial 23456 number (Which is trigger point for Outage scipt)
I will get the options Press 1 fo Global Main Outage, Press 2 for VIP Outage, Press 3 for Lotus notes outage.
IF i press 1 i will be dircted to Global MAin Outage script where i ill hear "Press 1 to enable, Press 2 to disable and Press to Check th current message"
If i press 1 in this i will get prompt to enable ne message" something like Please record your message..Now i have to record the message, so i need to write this message somewhre and than if than to make this file put into the repository to play and if i record it again it should overrite the existing file and do the same.
Someone must hav done this, so pleas advise how we can do this, if possible please send the small script as an example.
We developed the logic of recording as per what your script.
And we had done something similar yesterday, however at the same point we are having issues. We can hear what we are recording but the file is not getting stored at the location provided by us in the variable.
Basically when we dubug the script when we hit "1" to keep the recording, it dont wait at write node, just goto set and then ends the calls.
I am attaching the sampl script, wave files are bit too odd but we are using them for testing. you can have a look at them if you can and let me know if something we are missing.
Just FYI we are trying using RDP to IPCC srver, if this is the case. i am going to try now on the server itself will post you if it works
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...