I have a customer that would like to be able to call in and monitor calls and be able to leave that call up indefinatly to continually monitor calls. What they are saying is that right now they can leave it up for 2 hours and then the call drops. Is there even a setting in RSM that controls the max call duration or is this maybe a CUCM timer that is kicking off? Has anyone delt with this before and can offer some help?
If so, the RSM script does loop a bit, and scripts have a maximum step execution of 1000 steps by default. While there's not real set time limit or a count of how many steps will execute in a specific time window, you could always just attempt to increase the max steps for your system under System Parameters. Or, you could roll your own RSM app, just by looking at how the system one works. To view the script, open the editor and go to File > New > Queuing > Remote Monitoring.
Please use the star ratings to help drive great content to the top of searches.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...