Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Resources are selectied only in RR manner


UCCX 5.0(2). I have 1 (one) CSQ with 2 (two) agents in there.

- Resource Pool Selection Model for my CSQ is "Resource Group"

- Resource Selection Criteria is "Linear"

- there are 2 (two) resource listed: Agent_1 (top-most), Agent_2 (the second one) (particullary in this order)

- application associated with CSQ uses Resource Select step which also works with CSQ

If I make consequtive (not parallel !) calls to this app distribution occured only in round-robin manner:


1st call: Agent_1 is selected

2nd call: Agent_2 is selected

3rd call: Agent_1 is selected

4th call: Agent_2 is selected

5th call: Agent_1 is selected



It happens despite of Agent_1 readiness (in terms of CAD) per test incoming call.

What can be the reason ?

Might it be I need to restart something after updating Resource Selection Criteria for CSQ ?


Re: Resources are selectied only in RR manner

I think no need to restart.

Go to the Resources link under Subsystems > RmCm, which enables the RmCm subsystem to synchronize the agents

New Member

Re: Resources are selectied only in RR manner

It's strange, you know.

I've removed primary & ipcc extensions from specific user.

But this user still remains in 'Subsystem | RmCm | Resources' page.

Resync (Jtapi & Data) didn't help.

What is the way of removing this obsolete user/agent ?