12-28-2006 10:46 AM - edited 03-14-2019 12:24 AM
I would like to define the "calling number" when forwarding calls to an outside line. I know I could mask the number through the Call Manager but that would not allow me to change the number based on each script I am using.
Solved! Go to Solution.
12-29-2006 07:04 AM
The only solution I can think of is doing this at the cti port level, where you'll configure seperate jatpi groups for each application thus a script. Then configure the external phone number mask on the cti ports to the appropriate one.
HTH, please rate all helpful posts!
Chris
12-29-2006 07:04 AM
The only solution I can think of is doing this at the cti port level, where you'll configure seperate jatpi groups for each application thus a script. Then configure the external phone number mask on the cti ports to the appropriate one.
HTH, please rate all helpful posts!
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide