Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Silent Monitoring/Recording for windows 7 32bit

 Call Manager System version: 7.1.5, and UCCX System version: 8.0.2.

Windows 7 32 it and the NIC is Intel Pro/1000 GT Desktop adapter.

we are doing a testing on the windows 7 CAD and windows 7 CSD, silent monitoring and recording is not working.

However it is working for XP CAD and win7 CSD

Could anyone had a similar situation, Does the Silent  Monitoring/Recording works on windows 7  32 bit PC's?

Thanks

 

8 REPLIES
Silver

Found this in another

Found this in another discussion:

The CTI OS silent monitor feature requires that you modify a WinPcap registry setting after installing (or reinstalling) WinPcap. In the Windows registry go to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPF

Change the value of the Start setting under this key from 0x00000003 to 0x00000002. Reboot the PC

New Member

Hi Omar,     Thanks for the

Hi Omar,

 

    Thanks for the information, it looks we need to install winpcap software and modify the registry settings to make it work.  Is there anyother way it works without installing the thirdparty software, as this has to be done in alot of pcs.

 

Thanks

Silver

Hi Barry,I would try this on

Hi Barry,

I would try this on one PC first and make sure it even fixes the issue that you're having before moving on to another solution.

Hi Barry,Some time ago I have

Hi Barry,

Some time ago I have the same issue, I corrected it updating NIC driver to the last version, it was for HP and Dell Laptops.

Regards.

 

New Member

Hi Emmanuel,      Thanks for

Hi Emmanuel,

 

     Thanks for the reply, the issue still not resolved.  We have Dell Desktops, The desktops has two nics,  one on the motherboard and another on a nic card, we are connected to the card, but under windows 7 we couldn't force this to be the primary NIC.  Please let me know your thoughts.

 

Thanks

Barry

 

 

Hi Barry,When you record a

Hi Barry,

When you record a call, can you see the file with the supervisor client? the file doesn´t contain audio or is it missing?

Regards.

New Member

Hi Emmanuel and Chintan,   

Hi Emmanuel and Chintan,

     Thanks for the reply. The supervisor attempts to start monitoring and get a failure immediately with the error 'no audio received'.    We did tried the postinstall.exe that didn't help either.

Thanks

Barry

did you look at postinstall

did you look at postinstall.exe?

you have to select NIC there. and in windows 7, sometimes by default it doesn't pop up.

 

regards

chintan

172
Views
10
Helpful
8
Replies
CreatePlease to create content