Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sip trunk to CVP

Hello everyone.I have a question.

Is possible that from CUCM to CVP have two sip trunk at same time to work with different resources of CUCM.

ipphoneA>CUCM>Sip Trunk >CVP10.10.10.10

                         MRGL_X

                         MRG_X

                            XCODE

ipphoneB>CUCM>Sip Trunk >CVP10.10.10.10

                         MRGL_X

                         MRG_X

                            MTP

The reason for that I have a side remote with low bandwidth I want the XCODE to send RTP G.729 to side remote and G711 to vxml Gw.

Another phone using seconds SIPTrunk touse MTP instead of XCODE.

can anyone help me?

Thanks.

Everyone's tags (1)
1 REPLY
Hall of Fame Super Silver

Sip trunk to CVP

Sure you can, just make sure you set it up prperly for inbound side if you are using the SIP trunk for incoming calls from CVP as well, as by default if you do not change the SIP port calls could hit either one of them.  What you can do to control which trunk CVP is hitting is build a different SIP security profile and define other port i.e. 5065.

Chris

625
Views
0
Helpful
1
Replies
CreatePlease login to create content