Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Some doubts on UCCE CVP comprehansive call flow.

hi,

 

What is the configuration on CVP that forwards call to ICM.

as i am not able to find any configuration in OAMP or CVP that target to ICM.

the flow is as follows-

 

VG-CUSP-CVP-VRUPG-ICM-CCMPG-CUCM

Thanks and Regards-

PK

2 ACCEPTED SOLUTIONS

Accepted Solutions

There is no configuration in

There is no configuration in CVP for this,

at the startup CVP makes connection with VRU PG using GED-125.

once the PG connection is up, then only CVP call server will go up, else its status will be down or partial. 

by default, whatever request comes to CVP, it will ask ICM as a new call request. CVP works in tight integration with ICM.

 

regards

Chintan

Hi,There is no much

Hi,

There is no much configuration in CVP.

In CVP ,ICM subsystem configuration the PORT number you have mentioned is should be same as the PORT number  mentioned in CVP PIM configuration.

and in PIM configuration you should mention the CVP host name.

 

 

Through this PORT CVP interact with VRU PG using GED-125 and VRU PG communicate with ICM (Router).

2 REPLIES

There is no configuration in

There is no configuration in CVP for this,

at the startup CVP makes connection with VRU PG using GED-125.

once the PG connection is up, then only CVP call server will go up, else its status will be down or partial. 

by default, whatever request comes to CVP, it will ask ICM as a new call request. CVP works in tight integration with ICM.

 

regards

Chintan

Hi,There is no much

Hi,

There is no much configuration in CVP.

In CVP ,ICM subsystem configuration the PORT number you have mentioned is should be same as the PORT number  mentioned in CVP PIM configuration.

and in PIM configuration you should mention the CVP host name.

 

 

Through this PORT CVP interact with VRU PG using GED-125 and VRU PG communicate with ICM (Router).

192
Views
0
Helpful
2
Replies
CreatePlease to create content