For SPAN based Supervisor silent monitoring and recording, I have the SPANed packets coming until the back of UCS but can not get them to teh CAD Server VM on that UCS box.
So if I connect the cable to my laptop I see all RTP/UDP/Skinny packets on it.
Now I connect this cable to a pre-decided NIC card on the back of the UCS server. And this NIC card i.e vmnic1 is assigned to a vNetwork called SPAN fpr e.g. I added a 3rd NIC card to the CAD/PG VM server and assigned this SPAN network to it – and its not seeing any incoming / outgoing packets at all.
Attached my ESXI side config. Am I missing something please?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...