Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Standalone CVP Setup

Hi

I am setting up a standalone CVP solution. Basically I want the call to hit the ingress gatway, call is passed to VXML gateway, there is a small script played with an option chosen and then the call is transferred.

I have tested the script and it is working fine. Im think the problem is with dialpeers on the ingress gateway.

So I have an app setup as follows

service bootstrap flash:CVPSelfService.tcl

paramspace english index 0

paramspace english language en

paramspace english location flash:

param CVPSelfService-app HelloWorld

param CVPSelfService-port 8080

paramspace english prefix en

param CVPPrimaryVXMLServer x.x.x.x

and a dial-peer of

dial-peer voice 77777 voip

translation-profile incoming block

service bootstrap

max-conn 45

voice-class codec 1

incoming called-number 77777.....

dtmf-relay rtp-nte h245-signal h245-alphanumeric

icpif 25

no vad

!

what am I missing here?

Thanks

Michael

2 REPLIES
New Member

Re: Standalone CVP Setup

sent on the wrong dialpeer there. The dial-peer I have is

dial-peer voice 77777 pots

service bootstrap

incoming called-number 77777

direct-inward-dial

port 0/0/0:15

New Member

Re: Standalone CVP Setup

its ok i was missing the ip host for the media server. working fine now

326
Views
0
Helpful
2
Replies