Is there anyway to suppress dialtone on an agent's ICD line? Each agent phone has an ICD line and a personal line. We want to eliminate the possibiltiy of an agent using the ICD line to place an outgoing call. The CCM version is 4.2.3, the IPCC is 4.5 - thank you.
You can set the calling search space up on the agent line as a ring down line to a bogus number. This way when they go off hook on their agent line they will just get a fast busy (they will still obviously be able to take inbound calls).
Follow the instructions in this link with one caveat, on the translation pattern setup in the called party transform mask (in this link 2006 is the number) just put in a bogus directory number.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...