11-07-2006 09:42 AM - edited 03-14-2019 12:14 AM
Hello,
Are there any guidelines on the amount of survivability applications that can be run on a 5350XM?
Below is an example of 2 different apps I intend to setup but I'd like to set up approx 20 for 20 different departments.
Regards,
Michael
application
service survive_dept1 flash:survivablity.tcl
!
!
!
service survive_dept2 flash:survivablity.tcl
!
!
dial-peer voice 1 pots
description **** All incoming POTS calls ****
incoming called-number .T
direct-inward-dial
!
dial-peer voice 55010 pots
description **** Department 1 ****
translation-profile incoming IPCC
incoming called-number 55010
application survive_dept1
direct-inward-dial
!
dial-peer voice 55020 pots
description **** Department 2 ****
translation-profile incoming IPCC
incoming called-number 55020
application survive_dept2
direct-inward-dial
!
Solved! Go to Solution.
11-13-2006 03:00 PM
Hi Michael,
There may be a limit, but 20 is no where near it :-) I have seen examples with hundreds.
-janet
11-13-2006 09:26 AM
Call survivability must be considered for both the CVP and non-CVP related calls. For the Cisco CallManager endpoint phones, this is accomplished via on IOS feature known as Survivable Remote Site Telephony (SRST).
Try:
11-13-2006 03:00 PM
Hi Michael,
There may be a limit, but 20 is no where near it :-) I have seen examples with hundreds.
-janet
11-14-2006 02:16 AM
Great thanks Janet.
Regards, Michael
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: