Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

TCP connection to MR application has been broken.

Hello

I have 2 PG's on the ESX 8.6

IPCC 7.5.9

While working on previous versions of ESX were no problems, but the transition to version 8.6 was the break off the relationship between party A and party B, but with ping everything is OK, no packets are lost. In the log the following error

09:43:12 pg3A-pim1 Trace: MR_Dialogue::DialogHashOut m_DialogHashIndex -1

09:43:14 pg3A-pim1 Trace: MR_Dialogue::DialogHashOut m_DialogHashIndex -1

09:43:14 pg3A-pim1 Trace: MR_Dialogue::DialogHashOut m_DialogHashIndex -1

09:43:16 pg3A-pim1 Trace: MR_Dialogue::DialogHashOut m_DialogHashIndex -1

09:43:39 pg3A-pim1 No response from MR application to last 3 HeartbeatReq messages.  Breaking connection.

09:43:39 pg3A-pim1 TCP connection to MR application has been broken.

09:43:39 pg3A-pim1 Trace: Transport::RecvBytes. SOCKET_ERROR=10053

09:43:54 pg3A-pim1 Error receiving data from MR application.

  Last API Error [10053]: An established connection was aborted by the software in your host machine.

09:43:40 pg3A-pim1 Trace: Transport::SendMessage. SOCKET_ERROR=10038

09:43:54 pg3A-pim1 Error sending data to MR application.

  Last API Error [10038]: An operation was attempted on something that is not a socket.

09:43:54 pg3A-pim1 Trace: MR_Application::Receiver. Problem with receiving application messages.  Exit Receiver thread.

09:43:54 pg3A-pim1 Notifying Out Of Service to OPC (ThreadManager::ClearActivated: MR Application Receiver  thread failed.).

09:43:54 pg3A-pim1 ProcessPIMSetIdleReq: Peripheral 5010 going idle.

09:43:54 pg3A-pim1 Peripheral 5010 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=-1).

09:43:54 pg3A-pim1 Trace: Ignoring idle request for other side to peripheral -1 side=0

1 REPLY
Cisco Employee

TCP connection to MR application has been broken.

Eugene,

What is ESX 8.6 ?

If you meant VMWare ESX/ESXi then, as I know they only have ESXi 5.0 version as of latest which is supported for Cisco UC apps. Moreover, UCCE/ICM 7.x is not supported for virtualization.

Did I misunderstand anything here ?


GP.

926
Views
0
Helpful
1
Replies